This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 loboy clutch brake question
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
154 loboy clutch brake question
How do I know if I need to replace the clutch brakes? ( 2- round plastic like brakes) they install in the retainer that bolts to the trans case. I assume the brakes wear, and need replacing/ One side of the brakes appear flat, and has a wood like grain sticker on it>>? also is there a right and wrong way to insert the brakes into the retainer? thanks for the help Jim
-
- 10+ Years
- Posts: 682
- Joined: Fri Feb 07, 2003 8:43 am
- Zip Code: 53536
- Tractors Owned: Tractors owned past/present:
Farmall.....F-1206, F-806 sn#501.
Cub Cadet...Original(s), 122, Spirit of 76, 1200, 1250, 1450, 782, 782 Diesel (2), 984, 982, CADET 000 LT Prototype. - Circle of Safety: Y
- Location: Wisconsin.......The Badger State
Re: 154 loboy clutch brake question
These (404642R1) should look like a pool cue stick tip. The "woodgrain tip" should face/contact the steel flywheel.
Cub Cadets....Engineered for people who know better!
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 loboy clutch brake question
Ken, that would be the flat side makes contact with flywheel. The rounded part faces retainer. thanks,Jim
-
- 10+ Years
- Posts: 233
- Joined: Sun Jul 20, 2003 6:16 pm
- Zip Code: 38506
- Tractors Owned: Cub demo
- Location: Cookeville, TN
Re: 154 loboy clutch brake question
Usually the way to tell if you have a problem is the clutch brake doesn't stop the clutch and you "grind them till you find them". The usuall problem is too much wear in the linkage system, causing continual adjustment. Tighten up the linkage with new bushings(welded in) and the adjustment will be few again.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 loboy clutch brake question
Dave, do you have any pictures of the linkage fix? Not sure I understand. I know the bolt that connects to the brake bracket, has adjustment ,By turning in or out, not sure what bushings you are talking about, thanks Jim
-
- 10+ Years
- Posts: 233
- Joined: Sun Jul 20, 2003 6:16 pm
- Zip Code: 38506
- Tractors Owned: Cub demo
- Location: Cookeville, TN
Re: 154 loboy clutch brake question
Jim,
Check all the moving joints between the foot pedal back to the point the clutch brake starts to engage. Any wear throughout the system(like the pivot points where pins wear against holes in the brackets), this lash adds up through the linkage and often time is greater than what is available in the adjustment back at the brake. This is why on older units people complain of constantly having to adjust. I have seen some clever adaptations where the brake can be applied by hand directly on the clutch brake itself. These are quite effective, but do require one hand to "hand brake" and use of your other hand to select the next gear.
Check all the moving joints between the foot pedal back to the point the clutch brake starts to engage. Any wear throughout the system(like the pivot points where pins wear against holes in the brackets), this lash adds up through the linkage and often time is greater than what is available in the adjustment back at the brake. This is why on older units people complain of constantly having to adjust. I have seen some clever adaptations where the brake can be applied by hand directly on the clutch brake itself. These are quite effective, but do require one hand to "hand brake" and use of your other hand to select the next gear.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 loboy clutch brake question
Thanks Dave. I was wondering why Ih did not have a true brake pad, kind of like the old hand clutch days, and belt pulley brakes, that used a brake lining to stop the pulley? I will check the linkages, and do my best. thanks again, Jim
-
- 10+ Years
- Posts: 65
- Joined: Sat Jun 05, 2010 7:39 pm
- Zip Code: 15044
- Tractors Owned: 1970 International Cub Low Boy 154
- Location: West Deer Township, PA
Re: 154 loboy clutch brake question
Hi, Iknow this is 3 years ago but what worked?
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Stuck brake drum and spacer Attachment(s)
by rednax » Sun Feb 06, 2022 2:35 pm » in Lo-Boy Series - 154, 184, 185 - 6
- 544
-
by outdoors4evr
Mon Feb 28, 2022 7:30 am
-
-
-
Installing dual brake peddals on 1969 model 154 Attachment(s)
by Thisoldtruck » Sat Apr 02, 2022 6:28 pm » in Lo-Boy Series - 154, 184, 185 - 4
- 418
-
by willys55
Sun Apr 03, 2022 2:56 pm
-
-
- 5
- 301
-
by Mullda
Tue Nov 22, 2022 12:34 pm
-
-
LoBoy 154 coughs, but won’t start
by elmrfudd » Fri Apr 07, 2023 2:39 pm » in Lo-Boy Series - 154, 184, 185 - 31
- 885
-
by elmrfudd
Wed Apr 12, 2023 9:51 pm
-
-
-
LoBoy 154 - 3260 Deck Removal?
by Dougget » Mon Apr 01, 2024 9:33 am » in Lo-Boy Series - 154, 184, 185 - 3
- 124
-
by SONNY
Sun Apr 07, 2024 9:13 am
-
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests