This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Sediment Bowl
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 192
- Joined: Tue May 24, 2011 12:26 pm
- Zip Code: 29325
- Skype Name: JRICK
- Tractors Owned: 1940 Allis Chalmers WC
1949 Farmall Cub "Haydee Bug"
1960 Massey Ferguson Diesel Deluxe
1950 Allis Chalmers "B"
1980 Power King Model 1616
1991 400A Belarus
1952 Massey Harris Pony - Circle of Safety: Y
Sediment Bowl
I cleaned my gas tank and installed a brand new sediment bowl.I filled the tank with several gallons of gas,looked for leaks and didn't see any.I said that was enough for today. I went back to the shop this morning and smelled gasoline.The dang sediment bowl was leaking,I tried to tighten it,still leaking.The smart man that I am,I have a new spare gasket.I put it in and seem to correct the problem.I then started working on some wiring on the tractor,after about an hour the sediment bowl was leaking again.Not only that the cutoff lets it drip gas when turned off.I saw in an old thread on sediment bowls and someone bought a rubber sediment bowl gasket at NAPA.I would be thankful for a number if anyone knows it...
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Sediment Bowl
I have not had good experiences with replacement sediment bowl assemblies currently on the market.
I replace the sediment bowl assembly with a ball valve and inline fuel filter.
I replace the sediment bowl assembly with a ball valve and inline fuel filter.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Sediment Bowl
thanks for the tip eugene, i have one that needs replacement . coppersmythe............................
-
- 10+ Years
Re: Sediment Bowl
Sediment bowls can leak in several locations, original ones can normally be repaired, here is a NAPA part number:
Balkamp (NAPA) 730-9506
It is made out of rubber.
Balkamp (NAPA) 730-9506
It is made out of rubber.
-
- 10+ Years
- Posts: 754
- Joined: Sun Jan 20, 2008 5:52 pm
- Zip Code: 44491
- Tractors Owned: 52 Cub, 42 Farmall H 49 Ford 8N (FIL's tractor) and a yard full of implements for them 51 Chevy 3100 PU
- Circle of Safety: Y
- Location: West Farmington, OH
Re: Sediment Bowl
If its leaking around the shutoff, and the packing nut is snugged down and out of travel like mine was, I was able to put a wrap of teflon impregnated valve packing in and reassembled. Its held up and not leaked for about a month now. I'm keeping my fingers crossed, but I expect it will hold up for a long time. John
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Sediment Bowl
I am strongly against removing the fuel bowl and replacing it with a ball valve. The fuel bowl is a major part of the fuel system for it to operate as it should.
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Team Cub Mentor
- Posts: 17489
- Joined: Mon Feb 03, 2003 6:45 am
- Zip Code: 21550
- Tractors Owned: "1950 Something" Farmall Cub
1957 Farmall Cub w/FH
1977 International Cub w/FH
1978 International Cub
1948 Farmall Super A - Circle of Safety: Y
- Location: MD, Deep Creek Lake
Re: Sediment Bowl
There are 4 places where the fuel strainer can leak.
* Where the strainer body goes into the fuel tank.
* Where the fuel line attaches to the strainer.
* The shutoff shaft packing nut (as previously mentioned).
* Between the strainer body and the glass bowl.
You need to figure out where it's actually leaking and fix it. My guess would be the shutoff.
* Where the strainer body goes into the fuel tank.
* Where the fuel line attaches to the strainer.
* The shutoff shaft packing nut (as previously mentioned).
* Between the strainer body and the glass bowl.
You need to figure out where it's actually leaking and fix it. My guess would be the shutoff.
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: Sediment Bowl
Make sure you have the screen under the gasket so that the lip of the bowl is against the gasket, and the gasket is cleanly seated to the metal.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 505
- Joined: Fri May 05, 2006 12:00 am
- Zip Code: 54515
- Circle of Safety: Y
- Location: WI, Catawba
Re: Sediment Bowl
If I need to use a cork gasket I've had good luck coating it with black sensor safe silicone. I coat it as thin as I can all around and let it dry completely. I don't know what it is about the new cork but I can't find any that will hold gas.
Mark "birddog" Birdeau
![Circle of Safety](../safetyquiz/cos_avatar.png)
![Circle of Safety](../safetyquiz/cos_avatar.png)
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Sediment Bowl
Not a huge fan of fuel leaks anywhere, so the first thing to do is what Don suggests. Figure out where the leak is coming from...
If the leak originates at the tank inlet threads - do not overtighten the bowl but wrap the threads with teflon tape or better yet a good pipe dope for fuel systems. Do not let any teflon be exposed to the fuel.
If the leak is in the outlet threads of the sediment bowl to the fuel shut-off valve, then possibly it isn't tight enough or would benefit from teflon.
If the leak is in the packing of the shut-off valve, either remove and repack or change out the shut-off valve with a ball valve.
If the leak is because of improper installation of the gasket and screen, install properly, and reassemble. Ensure you use quality gasket material.
This is what I did with my fuel system - How To Upgrade A Cub Fuel System
If the leak originates at the tank inlet threads - do not overtighten the bowl but wrap the threads with teflon tape or better yet a good pipe dope for fuel systems. Do not let any teflon be exposed to the fuel.
If the leak is in the outlet threads of the sediment bowl to the fuel shut-off valve, then possibly it isn't tight enough or would benefit from teflon.
If the leak is in the packing of the shut-off valve, either remove and repack or change out the shut-off valve with a ball valve.
If the leak is because of improper installation of the gasket and screen, install properly, and reassemble. Ensure you use quality gasket material.
This is what I did with my fuel system - How To Upgrade A Cub Fuel System
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Sediment Bowl
or , maybe not .coppersmythe.........................................
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Sediment Bowl
Me to. Two different brands of sediment bowl assemblies. Tried all of the previous suggestions and a couple more, including having to polish the lip of the glass bowl because it was uneven. You shouldn't have to fix or repair something new out of the box.JRICK wrote:I installed a brand new sediment bowl.
If you are tired of fixing something that is brand new and suppose to work - - - ball valve and inline filter.
I have an excuse. CRS.
-
- Cub Pro
- Posts: 5238
- Joined: Sat Sep 08, 2007 3:49 pm
- Zip Code: 25271
- eBay ID: yogiefisher
- Tractors Owned: 37 John Deere A
63 Farmall Cub
53 Farmall Cub
56 Farmall Cub
IH 140
Massey 165 & 250 - Circle of Safety: Y
- Location: WV. Ripley
Re: Sediment Bowl
coppersmythe wrote:or , maybe not .coppersmythe.........................................
Maybe so,
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Image](http://i231.photobucket.com/albums/ee247/yogiefisher/NRALOGO99X100.jpg)
Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well-armed lamb contesting the vote.
Ben Franklin
-
- 10+ Years
- Posts: 1655
- Joined: Thu Dec 24, 2009 9:19 am
- Zip Code: 00000
- Tractors Owned: '48 trimmed dash high crop cub , '78 3/4 cub , lo-boy/59 mower , '64 "galvanized" cub , cub-6 toolbar , sicklebar mowers , 54 blade , plow , mott mower , early belly mower . . international 1010 pickup with 345ci v-8 .
- Circle of Safety: Y
- Location: louisiana
Re: Sediment Bowl
or, maybe so,
coppersmythe....................................
![Embarassed :oops:](./images/smilies/icon_redface.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
-
- 10+ Years
- Posts: 1631
- Joined: Fri Dec 22, 2006 6:28 am
- Zip Code: 37743
- Circle of Safety: Y
- Location: Tennessee East
Re: Sediment Bowl
TSC carries both style of bowls. The gaskets look the same but they are not. Right gasket for right bowl.
47 Cub (Glenda)
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
52 Super A
62 Cub (Genie)
43 H
42 M
In all things know which way the wind is blowing.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 206
-
by Dale Finch
Thu Mar 28, 2024 7:37 am
-
- 45
- 6335
-
by CharlieK
Thu Nov 30, 2023 10:08 am
-
- 7
- 311
-
by Gary Dotson
Fri Apr 14, 2023 7:52 am
-
- 17
- 382
-
by PFord
Tue Jul 19, 2022 4:37 pm
-
- 6
- 406
-
by Pap
Sun Jul 25, 2021 5:08 pm
Who is online
Users browsing this forum: Bob McCarty, Majestic-12 [Bot] and 6 guests