Has anyone ever replaced the brake pedal bushing that is housed in the attachment under the clutch housing/tube? There is a lot of play in my brake shaft and according to a diagram there is a bushing there. If anyone has the number or the diminsions I would be much appreciative. Thanks
Phillip
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Brake pedal bushing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 22
- Joined: Tue Nov 13, 2012 11:37 pm
- Zip Code: 37150
-
- Team Cub
- Posts: 11877
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Brake pedal bushing
Which model tractor?
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 22
- Joined: Tue Nov 13, 2012 11:37 pm
- Zip Code: 37150
Re: Brake pedal bushing
Sorry. Neglected to post that. It is the Super A.
-
- Team Cub
- Posts: 24280
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Brake pedal bushing
If you mean 6A in the above drawing, the part number is 355805R1.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 22
- Joined: Tue Nov 13, 2012 11:37 pm
- Zip Code: 37150
Re: Brake pedal bushing
Thanks Barnyard. That is the one. Finally got the pedal off the shaft. This is the only difficulty I have had with my teardown and rebuild. Where could one find that bushing? Secondly, how does one go about removing and replacing the bushing? Never done a bushing before.
Phillip
Phillip
-
- Team Cub
- Posts: 24280
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Brake pedal bushing
Phillip, I'm not sure it is still available from a dealer. You can try checking with your nearest Case-IH dealer.
As for removal, I have never done one but it may just tap out and the new one tapped back in.
If you get it out in one piece you may be able to find a suitable replacement at TSC or possibbly a hardware store.
As for removal, I have never done one but it may just tap out and the new one tapped back in.
If you get it out in one piece you may be able to find a suitable replacement at TSC or possibbly a hardware store.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 22
- Joined: Tue Nov 13, 2012 11:37 pm
- Zip Code: 37150
Re: Brake pedal bushing
Thanks. Will try that.
-
- 10+ Years
- Posts: 613
- Joined: Mon Feb 03, 2003 1:18 pm
- Zip Code: 27055
- Tractors Owned: 1951 Super A
1955 Cub Lo-boy
1955 Ferguson TO-35 - Circle of Safety: Y
- Location: NC, Yadkinville
Re: Brake pedal bushing
Case IH says 2 required at $40 each. That is crazy.
The four most expensive words in tractor restoration: "We might as well..."
-
- Similar Topics
- Replies
- Views
- Last post
-
-
'47 farmall A Manifold and Pedal Springs Attachment(s)
by Petermac7644 » Tue Nov 29, 2022 8:42 am » in Farmall A, Super A, AV, 100, 130 & 140 - 8
- 286
-
by Dh2jr
Tue Dec 13, 2022 5:33 am
-
-
-
brake job -basically the same as cub?
by inairam » Wed May 26, 2021 5:30 pm » in Farmall A, Super A, AV, 100, 130 & 140 - 2
- 252
-
by inairam
Wed May 26, 2021 8:30 pm
-
-
-
Super A brake pedals stuck?
by boboy » Wed Nov 09, 2022 10:04 am » in Farmall A, Super A, AV, 100, 130 & 140 - 5
- 204
-
by SamsFarm
Tue Nov 15, 2022 6:38 pm
-
Return to “Farmall A, Super A, AV, 100, 130 & 140”
Who is online
Users browsing this forum: No registered users and 2 guests