This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
what bearings and seals does the danco C3 use?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 296
- Joined: Sat Sep 08, 2012 10:14 pm
- Zip Code: 14113
what bearings and seals does the danco C3 use?
i would like to have a spare set to rebuild one spindle to keep in my cub parts box, just to have them. i ordered them at the dealer but the more i think about it $50+ is probably too much to pay. can you get these bearings at napa. is their a timkin part number? what about seals? is their a seal part number?
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: what bearings and seals does the danco C3 use?
Download the [url=http://www.farmallcub.com/[ Sorry, direct links to manual section is not allowed. ]/download.php?fname=./files/Mower%20Parts/RC-1A%20%20Rotary%20Cutters%2011-64%20OCR.pdf]RC-1A Rotary Cutters[/url] manual and go to page 175 which is Page 1 in Section K. That should answer your questions.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 5215
- Joined: Tue Jan 12, 2010 2:08 pm
- Zip Code: 12514
- Circle of Safety: Y
Re: what bearings and seals does the danco C3 use?
they are common trailer bearings
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: what bearings and seals does the danco C3 use?
See if you can find the IH numbers in here, usually you can cross reference the numbers to Timken pretty easily.
http://www.messicks.com/CAS/64438.aspx
http://www.messicks.com/CAS/64438.aspx
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: what bearings and seals does the danco C3 use?
Buzzard Wing wrote:See if you can find the IH numbers in here, usually you can cross reference the numbers to Timken pretty easily.
http://www.messicks.com/CAS/64438.aspx
I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: what bearings and seals does the danco C3 use?
Oops! Thanks Bob.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 2929
- Joined: Sun Apr 19, 2009 9:51 pm
- Zip Code: 63664
- Location: MO, Potosi
Re: what bearings and seals does the danco C3 use?
I just took a look at C-3 section in the RC-1A Rotary Cutters. The only "annotation" I see is for a belt on the Lo-Boy. It's in a little yellow balloon. I don't see anything for the bearings. I don't need the numbers, I found them a long time ago by looking at the IH site parts manuals for the IH part number and then doing a NAPA interchange search.bob in CT wrote:........I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
So did my download not take? Are the annotations missing? Can I not see the forest for the trees?
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: what bearings and seals does the danco C3 use?
Scrivet wrote:I just took a look at C-3 section in the RC-1A Rotary Cutters. The only "annotation" I see is for a belt on the Lo-Boy. It's in a little yellow balloon. I don't see anything for the bearings. I don't need the numbers, I found them a long time ago by looking at the IH site parts manuals for the IH part number and then doing a NAPA interchange search.bob in CT wrote:........I already did that in the parts book Rudi referenced. The pdf is annotated with Timken and CR part numbers for bearings and seals and Dayco numbers for belts.
So did my download not take? Are the annotations missing? Can I not see the forest for the trees?
You are correct. Dennis must have an earlier revision done before I rebuilt my C-3 and had to buy all those parts. I'll extract a page or send him a new file to update. My revision number is now 16.4, so it is always being updated and Rudi must have a later version or he would not have known about it. If anyone want my notes, I can email them the pages for the time being.
Spindle housing seal CR 12437
Bearing cup L44610 Timken
Bearing L44643 Timken
Bottom spacer 474 153 R1 new part number: G35361 The bottom seal rides on this and they can get frozen to the shaft.
Belts, B53 and B54 have been used for the 2 deck belts
BP-112 is the main drive belt for both Lo-Boy and Standard IH uses the same part number for both applications: 487 046 R1
I was not in a hurry when I did my job and got a great deal on bearings- 6 for $15 on eBay. Seals came from Rock Auto.
-
- 10+ Years
- Posts: 228
- Joined: Sat May 03, 2008 3:26 pm
Re: what bearings and seals does the danco C3 use?
BE SURE TO FILL THE SPINDLE FULL OF GREASE WHEN YOU REASSEMBLE--
PUT IN NEW SEALS--TOP SEAL HOLDS GREASE IN DIRT OUT---BOTTOM SEAL
HOLDS DIRT OUT BUT LETS GREASE OUT---ON FINAL ASSEMBLE YOU SHOULD
HAVE .005 TO .007 PLAY IN BEARINGS---LAST THING TO DO IS PUMP GREASE
IN SPINDLE TILL IT COMES OUT THE BOTTOM SEAL----
-------BE CARE FULL WHICH WAY YOU PUT BOTTOM SEAL IN------
PUT IN NEW SEALS--TOP SEAL HOLDS GREASE IN DIRT OUT---BOTTOM SEAL
HOLDS DIRT OUT BUT LETS GREASE OUT---ON FINAL ASSEMBLE YOU SHOULD
HAVE .005 TO .007 PLAY IN BEARINGS---LAST THING TO DO IS PUMP GREASE
IN SPINDLE TILL IT COMES OUT THE BOTTOM SEAL----
-------BE CARE FULL WHICH WAY YOU PUT BOTTOM SEAL IN------
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 317
-
by inairam
Sun Jun 05, 2022 6:17 pm
-
- 3
- 286
-
by hotrodcars
Fri May 28, 2021 1:41 pm
-
-
Reassemble Danco C3 Spindle Attachment(s)
by Blueskypilot » Sat Apr 06, 2024 12:29 pm » in Farmall Cub - 2
- 528
-
by Blueskypilot
Sat Apr 06, 2024 6:30 pm
-
-
- 5
- 250
-
by SamsFarm
Mon Aug 15, 2022 4:40 pm
-
- 1
- 154
-
by Glen
Thu Mar 02, 2023 9:15 pm
Who is online
Users browsing this forum: farmallcubkid, Majestic-12 [Bot] and 8 guests