This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
How important is the idle tube?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 16
- Joined: Tue Nov 06, 2012 9:23 pm
- Zip Code: K9J6X5
- Tractors Owned: 48, 56, 56 and 58 FCub
- Location: Peterborough, ON, Can
How important is the idle tube?
With the carb apart on our 48 cub, you can see the idle tube is stuck with about a 1/8" of the tube sticking up above the bottom part of the carb. It looks to be broken off where the thread starts. How does this effect the how the tractor runs or idles?
-
- 10+ Years
- Posts: 2010
- Joined: Fri Mar 27, 2009 10:07 pm
- Zip Code: 22843
- Tractors Owned: Farmall Cub 1949, Oliver OC3 crawler 1951, Ford 8 N 1948, Oliver 77 Row Crop 1953, JohnDeere, La, 1941, John Deere 4115/w loader, 2004, John Deere stationary power unit LUC, Farmall M, 1946, Oliver 77 Row crop w/ loader
- Circle of Safety: Y
Re: How important is the idle tube?
It does have an effect on the performance of the engine, however on my first Cub the tube was broken and missing from the carb. The engine ran and at Boss Hogs fest I learned that it was supposed to be there. I got more info from the guys at the fest and Bob from Ct. went to his car brought me a tube and would not accept payment. Ths was my first lesson about the generosity of the good people at the Fest. I drilled out the old tube rethreaded the hole inserted the new tube and it has run fine for several years now.
Berlin
Berlin
I started out with nothing and now I only have half of that left !
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
Re: How important is the idle tube?
I have 2 or 3 that is broken off and honestly I cannot tell which ones it is without opening the carbs. I am sure it makes a difference. I just do not know how much.
"I ain't believing this!"
-
- Team Cub Mentor
- Posts: 6018
- Joined: Thu Jun 07, 2007 9:34 am
- Zip Code: 06040
- Tractors Owned: 77 Cub (red); 74 Cub; 52 Cub; 50 Cub ( post-demo)
- Circle of Safety: Y
- Location: CT, Manchester
Re: How important is the idle tube?
Bezirk wrote:It does have an effect on the performance of the engine, however on my first Cub the tube was broken and missing from the carb. The engine ran and at Boss Hogs fest I learned that it was supposed to be there. I got more info from the guys at the fest and Bob from Ct. went to his car brought me a tube and would not accept payment. Ths was my first lesson about the generosity of the good people at the Fest. I drilled out the old tube rethreaded the hole inserted the new tube and it has run fine for several years now.
Berlin
Berlin, I don't think that was me but I'll gladly accept payment for it now.
Idle tubes are not too bad to replace. Many, like one of mine, were broken by neophytes that did not expect them to be there when splitting a carb for the first time. You can buy one for about $15 from Macdonald carb & ignition. It you need a tap, it is a 4-48 thread, not the more common 4-40. A left twist drill is the cat's meow for extracting broken parts. The 4-48 tap drill is #42 so I would use something smaller that that (higher number) as an extractor and you may not need to re-tap at all.
-
- Cub Pro
- Posts: 4435
- Joined: Wed Dec 26, 2007 7:45 pm
- Zip Code: 32536
- Circle of Safety: Y
- Location: FL, Crestview
Re: How important is the idle tube?
jrob69 wrote:.... How does this effect the how the tractor runs or idles?
As the fellas said above, the tractor will run with the tube broken, but I believe you'll have a hard time getting the RPMs down to low idle specs with it broken.
Screwstick #3934
FCub - LoBoy - Numbered Series - Power Unit Databases
FCub - LoBoy - Numbered Series - Power Unit Databases
-
- 10+ Years
- Posts: 2010
- Joined: Fri Mar 27, 2009 10:07 pm
- Zip Code: 22843
- Tractors Owned: Farmall Cub 1949, Oliver OC3 crawler 1951, Ford 8 N 1948, Oliver 77 Row Crop 1953, JohnDeere, La, 1941, John Deere 4115/w loader, 2004, John Deere stationary power unit LUC, Farmall M, 1946, Oliver 77 Row crop w/ loader
- Circle of Safety: Y
Re: How important is the idle tube?
Bob , I hope you dont't charge me interest, if so I'll need to bring a Brink's truck to Cecil's to settle with you !
I'll see you at the NE Fest.
Berlin
I'll see you at the NE Fest.
Berlin
I started out with nothing and now I only have half of that left !
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15
- 601
-
by Bob McCarty
Mon Aug 02, 2021 4:13 pm
-
- 14
- 589
-
by Mac AR
Thu Oct 05, 2023 12:59 pm
-
-
IH Carb idle jet removal-what not to do Attachment(s)
by staninlowerAL » Sun May 07, 2023 6:53 pm » in Farmall Cub - 6
- 267
-
by SamsFarm
Mon May 08, 2023 9:16 am
-
-
-
IH Carburetor - Idle System Disabled... Attachment(s)
by bikerran53 » Sun Mar 20, 2022 5:23 pm » in Farmall Cub - 8
- 393
-
by Don McCombs
Tue Mar 22, 2022 6:30 am
-
-
-
Idle question - "Front Pull Hook?' Attachment(s)
by JustJim » Mon May 23, 2022 4:04 am » in Farmall Cub - 9
- 410
-
by John *.?-!.* cub owner
Tue May 24, 2022 8:49 pm
-
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests