This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Throwout bearing
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 37
- Joined: Tue Nov 29, 2011 2:40 pm
- Zip Code: 60518
Throwout bearing
I was cutting the grass yesterday I was almost done and then I heard chattering from the clutch if I let up on the pedal. I removed hand hole cover and looked inside I can move the throwout bearing back and forth on the shaft freely. What holds the throwout bearing in or on the fork? Will I have to split tractor to fix? Thanks
-
- 10+ Years
- Posts: 7832
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: Throwout bearing
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- Cub Pro
- Posts: 23701
- Joined: Sun Feb 02, 2003 2:09 pm
- Zip Code: 63664
- Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
- Location: Mo, Potosi
Re: Throwout bearing
Spring on the clutch pedal pulls the bearing away from the pressure plate. Yes, if you need to replace the throwout bearing it is necessary to split it. Here is a link to what a new one looks like, compliments of TM Tractor. http://www.tmtractor.com/new/cl/378fp.htm If you buy an aftermarket one soak it in oil a couple days to prelubricate it.
If you are not part of the solution,
you are part of the problem!!!
you are part of the problem!!!
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Throwout bearing
The throwout bearing is held in place by a yoke consisting mainly of parts 10 and 11 or 21 and 22 in the diagram above. The yoke, holding the throwout bearing, is held together at the bottom with either a pin or a bolt. Without knowing what came loose or apart, a tractor split is required.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 6684
- Joined: Tue Apr 27, 2010 11:34 am
- Zip Code: 27517
- Tractors Owned: '51 Cub #140966 "Bruno" with Woods 59 mower
'55 Cub #187541 "Betty" with Fast Hitch
'55 Cub #190482 "Ben" with Woods 42 mower
'55 Cub #191739 "Bertha" with Woods 42 mower
'56 Cub #194370 "Boris" with Mott Flail mower - Circle of Safety: Y
- Location: NC, Chapel Hill
Re: Throwout bearing
Double check the bolt at the pedal to make sure it hasn't come loose. Just a thought...
-
- Similar Topics
- Replies
- Views
- Last post
-
-
throwout bearing should be soaked in oil? Attachment(s)
by pett3227b » Mon Jan 02, 2023 4:38 pm » in Farmall Cub - 13
- 730
-
by john2189
Wed Jan 04, 2023 7:55 am
-
-
- 19
- 1187
-
by indy61
Mon Oct 04, 2021 1:53 pm
-
-
clutch and throwout bearing wear? Attachment(s)
by pett3227b » Fri Mar 18, 2022 8:08 am » in Farmall Cub - 1
- 333
-
by Glen
Fri Mar 18, 2022 8:45 pm
-
-
-
throwout bearing yoke and drive shaft Attachment(s)
by pett3227b » Wed Apr 20, 2022 9:49 am » in Farmall Cub - 13
- 483
-
by Gary Dotson
Fri Apr 29, 2022 7:54 am
-
-
-
My modified throwout bearing performance update
by sevy » Sat Jan 22, 2022 10:25 pm » in Farmall Cub - 14
- 623
-
by Jim Becker
Mon Jan 24, 2022 6:07 pm
-
Who is online
Users browsing this forum: Masmith and 5 guests