This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New member happy to have a cub
-
- 10+ Years
- Posts: 11
- Joined: Thu Dec 13, 2012 2:04 pm
- Zip Code: 44313
New member happy to have a cub
I bought my first Cub over the winter. My dad had a late 40's highboy and my uncle Lowel had a 56 cub lowboy. I knew one day i had to get one. I especially remember my uncles cub at his memorial day and labor day parties in Ohio. Letting all us kids drive it and pull a wagon around the yard. I looked for one just like his, and finally found one that was unmolested and quite orginal. I plan on restoring it to its orginal shape, based on an old picture i found of my uncles lowboy. I bought a 1957 , with plow. I plowed the drive with it this winter worked good. Then i decided to put a mower on it, just so i can acutally use it instead of just looking at the garage. I thought about how i wanted to make it unique in a way. So though some connections i have, i got a 60" cub Cadet mower deck for a commericial mower. Keeping the bloodline alive, old cub meets new cub. Engineering design thoughts were 1) Robust design, 2) ease of removal and installation 2) cut quality, using free hanging design 2) low cost. Attached are some pics of what i did. Used it just the other day to cut the lawn. Designed the pulley ratios for max FPM blade tip speed. But Found out quickly that the cub probably needs an engine rebuild as it bogs down pretty good going uphill cutting grass. Howevwer had a great cut, commerical zero turn quality. When not under load design reaches over 15000 FPM tip speed and really spreads the grass out side discharge. Belt length was a challenge, but with the automatic tightener and the front adjustment U- bolt, and some help from Carlisle belt sales, we nailed it. Has a double covered Kelvar belt ( not shown in pics) , Deck can be removed from the side by removing 4 pins, cut hieght is designed from 1 to 5 inches, Matching rear hole adjustment to keep rake of deck correct.
I am going to use the cub for about a year and determine what needs to be done, besides the obvious paint job. I have noticed new tires are needed in the front, they seem to rut in the ground while turning. Need a turf tire design for mowing.
Cant add pictures at the moment, file size to big, If i get some interest i will go back and reduce the file size and post some pics of tractor and mower assy.
Rich from Ohio
I am going to use the cub for about a year and determine what needs to be done, besides the obvious paint job. I have noticed new tires are needed in the front, they seem to rut in the ground while turning. Need a turf tire design for mowing.
Cant add pictures at the moment, file size to big, If i get some interest i will go back and reduce the file size and post some pics of tractor and mower assy.
Rich from Ohio
-
- Team Cub
- Posts: 24281
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: New member happy to have a cub
Rich, welcome to the group, It sounds like you have the mower figured out. We always like pix so if you can't get them reduced, feel free to email them to jeepguy1@cinci.rr.com and I will post them for you.
By the way, you are about 4 hours from the Barnyard Bash CubFest near Cincinnati May 31 & June 1. You might want to reserve a motel room and spend the weekend with us. It's a great way to meet many of the forum members and learn a ton about Cubs. There is more info about the Bash at http://www.barnyardbash.com.
Here is a link about some of this years projects viewtopic.php?f=8&t=78290
And here are some pix of an earlier Bash to give you an idea what goes on. http://photos.cubfest.com/thumbnails.php?album=1102
By the way, you are about 4 hours from the Barnyard Bash CubFest near Cincinnati May 31 & June 1. You might want to reserve a motel room and spend the weekend with us. It's a great way to meet many of the forum members and learn a ton about Cubs. There is more info about the Bash at http://www.barnyardbash.com.
Here is a link about some of this years projects viewtopic.php?f=8&t=78290
And here are some pix of an earlier Bash to give you an idea what goes on. http://photos.cubfest.com/thumbnails.php?album=1102
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- Team Cub
- Posts: 9534
- Joined: Wed Jul 26, 2006 10:50 am
- Zip Code: 44057
- Tractors Owned: 57 F-Cub - Dad & Mom's Cub
77 F-Cub - Red Long Stripe - Circle of Safety: Y
- Location: OH, Madison
Re: New member happy to have a cub
Rich,
Welcome! Yes, take in the Bash if at all possible. I'm further away than you are and I'm making the trip. Well worth your time.
Bill
Welcome! Yes, take in the Bash if at all possible. I'm further away than you are and I'm making the trip. Well worth your time.
Bill
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: New member happy to have a cub
Rich:
G'day to you and congrats on acquiring your 1st new to you Cub. Judging by your story, I have a feeling you already are addicted and you could end up with a herd if you aren't careful
Suggest you follow the links below, lots of resources for our members including How To's on resizing if need be and posting pics to the photohost or other hosting sites for pics.
G'day to you and congrats on acquiring your 1st new to you Cub. Judging by your story, I have a feeling you already are addicted and you could end up with a herd if you aren't careful
Suggest you follow the links below, lots of resources for our members including How To's on resizing if need be and posting pics to the photohost or other hosting sites for pics.
to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: New member happy to have a cub
When you mentioned rake, did you mean slightly lower in front? If level or low in back cub can't pull it. All mowers should be set up this way.
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: New member happy to have a cub
Welcome to the forum from Arkansas, and yes, love to see the pictures and how it is set up. Sounds like you took an innovative approach and nailed it.
-
- 10+ Years
- Posts: 11
- Joined: Thu Dec 13, 2012 2:04 pm
- Zip Code: 44313
Re: New member happy to have a cub
Thanks for the warm welcome. I compressed some photos hope they post. The Cub Cadet mower is off an Z force Zero turn. I has build in deck level adjusters so you can level it side to side and level front to back with the recommended 1/4" to 1/2" front tilt to the mower deck . Once this is established, the cut quality is very nice and does not cause the blades to drag on the back sucking power from the engine. At only 11 HP i was worried about this, but in first gear it cuts nicely. The rear mule drive pulleys were set up to be in the center of the travel of the deck and of coarse lined up with the rear PTO pull at a 90 deg turn. The auto belt tensioner keeps the belt tight as it swings up and down from Hydrualic unit. The u- bolt in the front is only to keep the belt tight. The deck bracket is designed to flex at rear pivot slightly and is hung by slotted bars to allow flex over uneven ground. Ideally the deck floats over the ground with respect to tractor . Also the main mower bracket mounts to the rear bracket mule drive at the location of pivot of the idler pulleys. This allows the deck to move up and down with minium change to belt lenght. It has an auto wash feature on it, ( hook a garden hose up to it) but doubt i will use that, i usually just blow off the grass.
-
- 10+ Years
- Posts: 11
- Joined: Thu Dec 13, 2012 2:04 pm
- Zip Code: 44313
Re: New member happy to have a cub
One more pic
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: New member happy to have a cub
A Cub that mows like a Cadet! Cool!
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- Cub Pro
- Posts: 1906
- Joined: Tue Jan 18, 2011 9:16 am
- Zip Code: 72940
- Tractors Owned: 1951 Farmall Cub, 152 disk plow, 2 gang disk, belly mower, sickle mower
1949 Farmall Cub, cultivator, moldboard plow, disk,front blade. Cub Cadet, LTX1045 Mower. Cub Cadet's 109, 125, 1000, and 1250
1961 cub c2 belly mower and full blade. 48 cub manual lift with cultivators.
1947 Cub - Circle of Safety: Y
- Location: Huntington, AR
Re: New member happy to have a cub
That's neat and thanks for taking time to post the pictures.
-
- 10+ Years
- Posts: 7840
- Joined: Tue Feb 15, 2005 10:10 am
- Zip Code: 71023
- Circle of Safety: Y
- Location: LA, Doyline
Re: New member happy to have a cub
Welcome to the forum.
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers
-
- 10+ Years
- Posts: 11
- Joined: Thu Dec 13, 2012 2:04 pm
- Zip Code: 44313
Re: New member happy to have a cub
I love this forum, great topics and very helpful. I think i found the issue with lack of power. Fuel sediment bowl, very dirty and clogged. Makes sense with the symptoms i was getting, where it starts off strong, but starts to blog down under full throttle after awhile. Let it sit and starts off strong again and repeats. Took the hood off to clean fuel system, then just continued to tear it down for painting, i will probably do the piston rings just for good measure. .
-
- 10+ Years
- Posts: 2253
- Joined: Fri Sep 10, 2010 5:23 pm
- Zip Code: 39861
- Tractors Owned: 76 Cub Denim Springs
49 Cub Denim Springs
51 Cub Uncle Harvey
"Jacksonville" 53 Cub
"Jackson" 76 Cub
"Louie" 64 Cub Fast Hitch
"Paw Paw"71 Cub Fast
Hitch
"Alvin" 72 Cub
"Ugly" 75 Cub
76 Cub Val
Mr. Kirkland" 77 Red Cub
77 Cub "Russell
76 Cub w/fast hitch "Edgar"
76 - 185 Cub Lo Boy
John Deere 2003 - 5320
Kubota 7060
Kubota 5400
Kubota 2680
John Deere 445
TO20 Ferguson - Circle of Safety: Y
- Location: Jakin Georgia
-
- 10+ Years
- Posts: 2795
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: New member happy to have a cub
Uh-Oh... Hood's off.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 11
- Joined: Thu Dec 13, 2012 2:04 pm
- Zip Code: 44313
Re: New member happy to have a cub
I know , its hard to stop once you start.
Return to “Introduce Yourself”
Who is online
Users browsing this forum: No registered users and 1 guest