I own a 1955 R190 which was a fire truck, but converted to a dump truck. I had a bunch of trees cut at my place so I wanted to use the truck to help with the clean up. I got the truck started but then noticed that I don't seem to have any brakes. I sure don't remember this being the case when I parked the truck last fall. I opened the master cylinder and noticed it was low. So I put fluid in but still don't seem to have any pressure. I'm not sure if this truck had vacuum brakes on it or not. Also just as frustrating is that I used the dump box once, and now it won't dump. It's a PTO driven pump. It might be low on hydrolic fluid.
Any suggestions?
J
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
International R190 Truck (no brakes)
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
International R190 Truck (no brakes)
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: International R190 Truck (no brakes)
Vacuum assist so that the driver doesn't have to press so hard on the pedal to stop the truck.
Fill the master cylinder, step on brakes, have some one check each wheel cylinder for a leak when brake pedal depressed. Also the brake lines. If brake pedal gets hard when depressed and stays hard, got brakes. If pedal gets sort of hard and then slowly moves to floor board, hydraulic fluid leak.
PTO pump. check fluid level. Check to see if pto pumps drive shaft is engaged when it's suppose to be in operation.
Fill the master cylinder, step on brakes, have some one check each wheel cylinder for a leak when brake pedal depressed. Also the brake lines. If brake pedal gets hard when depressed and stays hard, got brakes. If pedal gets sort of hard and then slowly moves to floor board, hydraulic fluid leak.
PTO pump. check fluid level. Check to see if pto pumps drive shaft is engaged when it's suppose to be in operation.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: International R190 Truck (no brakes)
The funny thing about the brakes is that the pedal has no resistance at all. I know it's connected, but just does not seem to be doing anything. I have checked for leaks and see nothing. I checked each wheel and they all appear to have fluid.
Yea the PTO is spinning. Like stated it worked just fine once, and then stopped working after that. I'm pretty sure it is just low on fluid.
J
Yea the PTO is spinning. Like stated it worked just fine once, and then stopped working after that. I'm pretty sure it is just low on fluid.
J
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: International R190 Truck (no brakes)
Truck could have any one of about 7 or 8 different braking systems. Check local library for a brake service manual containing information on this specific truck. Once the braking system is identified and diagrammed, you should be able to locate the problem.
Call the local Case/IH dealership and inquire about the braking system.
Call the local Case/IH dealership and inquire about the braking system.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 505
- Joined: Fri May 05, 2006 12:00 am
- Zip Code: 54515
- Circle of Safety: Y
- Location: WI, Catawba
Re: International R190 Truck (no brakes)
If you know the pedal is connected, and there is no resistance, I would guess that the piston is stuck in the depressed position. This of course is presuming that the booster (if there is one) is frame mounted and not between the pedal and the cylinder.
Mark "birddog" Birdeau
-
- 10+ Years
- Posts: 4116
- Joined: Thu Nov 09, 2006 11:26 pm
- Zip Code: 61722
Re: International R190 Truck (no brakes)
It probably has stuck/damaged or cracked cups in booster unit!---they will do that if not used regularly --- if lines/wheel cylinders/ etc dont show any external leakage,---sounds like a booster re-build would solve the problem,! thanks; sonny
-
- 10+ Years
- Posts: 353
- Joined: Sun Nov 30, 2008 3:12 pm
- Zip Code: 63664
- Circle of Safety: Y
- Location: Mo. Potosi
Re: International R190 Truck (no brakes)
That truck doesn't have air over hyd. assist brake system does it ? If it does you will get no pedal till you have air pressure up.At least that's how a old Reo 6x6 the local fire dept had worked. Seen several new guys gona drive the"Duce n a half" but couldn't get it out the door because "the brakes are out"
-
- Cub Pro
- Posts: 2779
- Joined: Sun Jul 01, 2007 10:07 pm
- Zip Code: 29518
- Circle of Safety: Y
- Location: SC, Cades 29518
Re: International R190 Truck (no brakes)
Don't know anything about "air over", but if normal hydraulic brakes, your master cylinder needs a rebuild. There should be at least some resistance felt if everything is bled correctly.
Rick Spivey
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
'52 Cub ("Great Personality") 148xxx
'48 Cub with FH ("Gunny Cub") 38xxx
'57 Lambretta (a slow work in progress)
'74 Triumph TR6 (Mama's toy)
-
- 10+ Years
- Posts: 219
- Joined: Thu Nov 12, 2009 1:36 pm
- Zip Code: 61272
- Tractors Owned: Tractors
1940s Allis Chalmers B
1966 140
Cars
1964 Cadillac
1955 R190 - Location: New Boston IL
Re: International R190 Truck (no brakes)
This truck does have hydrolic assist brakes. I was able to get the brakes working by adding LOTS of fluid to the tank under the passenger side of the truck, and then fiddling to get the air out. As soon as I did that brakes started working normally.
The PTO was just a broken sheer pin so that was easy. The brakes were more difficult, but hey that is the way these things go.
J
The PTO was just a broken sheer pin so that was easy. The brakes were more difficult, but hey that is the way these things go.
J
Jason
"Beauty through function and simplification."
"Raymond Lowey"
"Beauty through function and simplification."
"Raymond Lowey"
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: International R190 Truck (no brakes)
Jason:
Glad you were able to get it fixed. Been watching .. interesting.
Glad you were able to get it fixed. Been watching .. interesting.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
-
Looking for 1924 Stewart truck Lycoming Engine ignition terminals
by Bob McCarty » Sat Apr 22, 2023 5:51 pm » in Other Tractors and Machinery - 1
- 1127
-
by tst
Sat Apr 22, 2023 9:22 pm
-
-
-
For the International Collector who is looking for something different!
by Dale Finch » Wed Jan 04, 2023 12:43 pm » in Other Tractors and Machinery - 7
- 1020
-
by Super A
Thu Jan 05, 2023 7:49 am
-
-
-
This or that: Massey Ferguson 97 Wheatland FWA or International 806 Wheatland FWA Attachment(s)
by Urbish » Tue May 25, 2021 7:37 am » in Other Tractors and Machinery - 13
- 1920
-
by Don McCombs
Thu May 27, 2021 7:30 am
-
Return to “Other Tractors and Machinery”
Who is online
Users browsing this forum: No registered users and 1 guest