Hi All,
I was driving my cub a few weeks back when it lost all power and just quit. I've had intermittent issues with sediment getting into the carb so I figured that was the case. after applying the usual fixes this problem persisted. As I investigated alternative issues it became apparent I wasn't getting any spark from the Mag. After removing it and fiddling with it for a while I found that water had gotten inside, quite a bit of water. I got it dried out, reassembled, and back up and running but the question still remains; how to keep the problem from reoccurring. Has anyone else had this problem, and if so, any fixes that don't involve siliconing the coil cap to the body of the magneto?
Thanks in advance.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Magneto issues
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 47
- Joined: Tue Jun 30, 2009 10:32 am
- Zip Code: 80549
- Location: Wellington, CO
Magneto issues
1951 Farmall Cub - "Cranky"
1947 Farmall H - "Bessie"
1945 Ford 9N - "Danny"
"By endurance we shall conquer", E. H. Shackleton
1947 Farmall H - "Bessie"
1945 Ford 9N - "Danny"
"By endurance we shall conquer", E. H. Shackleton
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Magneto issues
Yup, been there done that ... as for fixes I applied Hi-Tack to both faces of the coil cap gasket. As far as the plug cap gasket - I haven't figured that out although I am thinking that I will cut a gasket from some of that thin rubber gasket material. Hopefully the cap will still engage the clips properly. That is the only thing I can see.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6
- 347
-
by Waif
Thu Jun 24, 2021 9:14 am
-
- 7
- 296
-
by Glen
Wed Sep 21, 2022 6:30 pm
-
- 3
- 259
-
by Jim Becker
Mon Sep 13, 2021 12:33 pm
-
- 9
- 261
-
by Zack11122
Sat Aug 07, 2021 1:55 pm
-
- 11
- 458
-
by Dale Finch
Tue Dec 20, 2022 6:48 pm
Who is online
Users browsing this forum: ScottyD'sdad and 4 guests