I was given this White Cub to fix, repair, get working again for use a a scuffler in the garden. I have had this thing for 3 yrs and it's still not done.
Biggest problem is the motor is really rusted up inside, valves, ports in the block, manifold all rusted bad. It sat outside in the rain too long.
So I bought a good running parts tractor, Red, to make 1 good one from the 2, The parts tractor is what I going to use and what ever parts are better on the White one will go on the Red one.
Right now I can't figure out how to put the 2 rear cultivators on, I can mount them same as they were on the White one but how do they lift, I seem to be missing parts.
I took pictures when I first got the White one but they don't show the hook up for the rear lift. I've had this thing so long I can't remember whether there was any thing there or not.
Pictures show what I got.
My pictures are too big to upload.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Help needed putting my cub back together
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Help needed putting my cub back together
Thanks Doug from Markham Ont. Canada
-
- 10+ Years
- Posts: 327
- Joined: Mon Dec 08, 2008 8:28 pm
- Zip Code: 65018
- Tractors Owned: 1947 cub #11248
1948 #39811 trimmed dash
1950 VAC Case - Circle of Safety: Y
- Location: MO California
Re: Help needed putting my cub back together
If you go to the bottom of this page and click on TM tractor parts that will take you to there sight. In the left hand side down near the bottom you will find How to hook up Implements.(click) At the very bottom you will find "Cultivator" check the photo out there. Hope this helps?
Ron
Ron
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
Thanks for the link and help, looks like I'm missing the round bar with the bracket in the middle.
Where to get one?
Thanks to midmo and to tmays who helped through PMs
Where to get one?
Thanks to midmo and to tmays who helped through PMs
- Attachments
-
- image.jpeg (156.65 KiB) Viewed 1551 times
Thanks Doug from Markham Ont. Canada
-
- Team Cub
- Posts: 11875
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: Help needed putting my cub back together
Doug, Welcome to the Forum. Rudi lives in Dieppe, NB and may be able to refer you to some suppliers up north so you don't have to import and go through that hassle. He will probably be in NY in October and may be able to bring back the part if it's delivered there (if you can wait).
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
Pictures
Finally figured out how to upload my pictures here.
Finally figured out how to upload my pictures here.
Thanks Doug from Markham Ont. Canada
-
- 10+ Years
- Posts: 347
- Joined: Tue May 05, 2009 9:54 am
- Zip Code: 65101
- Location: Jefferson City, MO
Re: Help needed putting my cub back together
How come the left tire is on backwards?
1959 International Cub Lo-Boy W/Fast hitch, 59 Woods, dozer blade, plow
1954 Farmall Super C W/Fast hitch, belly dozer blade
1950 Farmall M
1954 Farmall Super C W/Fast hitch, belly dozer blade
1950 Farmall M
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
Both tires are N/G and loaded with calcium, but the rims are in much better shape than the other tractor.
Basically 1 has good tires , N/G rims,
the other has N/G rims, good tires.
Take all the best parts and put them on 1 tractor.
Basically 1 has good tires , N/G rims,
the other has N/G rims, good tires.
Take all the best parts and put them on 1 tractor.
Thanks Doug from Markham Ont. Canada
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Help needed putting my cub back together
you need the bar for the rock shaft, I have many of them but you would have shipping cost, TSI will be at Cecils and should have what you need and Rudi can smuggle it up north :d
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Help needed putting my cub back together
Okey dokey .. let's see now ....
Doug, ifn you can source one and get it to Cecil's, I can bring it back to NB with us. I will be going to Ottawa in a couple months I think .. if you can wait that long then we can possibly meet at the confluence of the 417 and the 401 .. around Cornwall or so. Or I can put it on the bus - much cheaper than Canada Post or any other method. Both Boss and Tim aka tst have ads in the (NEW) Classified Ads, work it out with them. Or and here is a novel idea .. you could have one made ... it isn't hard at all. Any competent welder should be able to follow this:
Let us know.
Doug, ifn you can source one and get it to Cecil's, I can bring it back to NB with us. I will be going to Ottawa in a couple months I think .. if you can wait that long then we can possibly meet at the confluence of the 417 and the 401 .. around Cornwall or so. Or I can put it on the bus - much cheaper than Canada Post or any other method. Both Boss and Tim aka tst have ads in the (NEW) Classified Ads, work it out with them. Or and here is a novel idea .. you could have one made ... it isn't hard at all. Any competent welder should be able to follow this:
Let us know.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
Thanks for the info, looks like I need to move to the US.
The 1" bar in the drawing is it solid?
The 1" bar in the drawing is it solid?
Thanks Doug from Markham Ont. Canada
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Help needed putting my cub back together
DH1 wrote:Thanks for the info, looks like I need to move to the US.
The 1" bar in the drawing is it solid?
As a rock
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
Thanks.
Another question what colour is the grill suppose to be on the Red tractors?
Another question what colour is the grill suppose to be on the Red tractors?
Thanks Doug from Markham Ont. Canada
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Help needed putting my cub back together
Doug:
Yes it is a solid bar. The hole is drilled into the flat stock, rod is slipped through and then welded in place. Pretty basic welding.
Depends on what year .. on the '47 to '54 are woven wire grilles and are red. White showed up some time in '56.
You are much closer in many ways to the US than I am. Buffalo isn't that far if I remember correctly - 2 hours thereabouts. Cecil's is another 5 hours on the I-90. That is at least 3 hours less than I travel to get to Cecil's. It is a doable weekend .. might you think on the possibilities? Be a good place to meet a lot of really good folks and of course ... all kinds of parts hanging around or could be.
Yes it is a solid bar. The hole is drilled into the flat stock, rod is slipped through and then welded in place. Pretty basic welding.
Depends on what year .. on the '47 to '54 are woven wire grilles and are red. White showed up some time in '56.
You are much closer in many ways to the US than I am. Buffalo isn't that far if I remember correctly - 2 hours thereabouts. Cecil's is another 5 hours on the I-90. That is at least 3 hours less than I travel to get to Cecil's. It is a doable weekend .. might you think on the possibilities? Be a good place to meet a lot of really good folks and of course ... all kinds of parts hanging around or could be.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 24
- Joined: Sun Jun 30, 2013 5:19 pm
- Zip Code: l6b1a8
- Location: Markham Ont. Canada
Re: Help needed putting my cub back together
What happens at Cecil's, tractor show, swap meet?
Thanks Doug from Markham Ont. Canada
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Help needed putting my cub back together
Doug:
A CubFest .. CubFest Northeast to be exact. It is one heck of a weekend ..starts Friday evening and goes to Saturday evening or so. There are a lot of activities like carb workshops, splitting a Cub, etc. I think I am going to bring one of my engines and see what we can do with it. It is a real learning experience and it is 99% Cubs
A CubFest .. CubFest Northeast to be exact. It is one heck of a weekend ..starts Friday evening and goes to Saturday evening or so. There are a lot of activities like carb workshops, splitting a Cub, etc. I think I am going to bring one of my engines and see what we can do with it. It is a real learning experience and it is 99% Cubs
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15
- 667
-
by outdoors4evr
Mon Apr 04, 2022 5:36 am
-
-
I'm putting one of these trucks on my Christmas wish list!!
by Dale Finch » Sat Oct 30, 2021 9:05 am » in Farmall Cub - 4
- 337
-
by Lt.Mike
Sat Oct 30, 2021 3:11 pm
-
-
- 9
- 190
-
by Kalebtrojacek
Sat May 04, 2024 8:53 pm
-
-
Back to work for the old gal!! Attachment(s)
by Dale Finch » Sun Sep 26, 2021 11:52 am » in Farmall Cub - 15
- 565
-
by k hutchins
Sat Oct 02, 2021 7:46 pm
-
-
-
Back in the Cub business--kinda. Attachment(s)
by Super A » Mon May 16, 2022 8:44 am » in Farmall Cub - 5
- 291
-
by SamsFarm
Mon May 16, 2022 7:15 pm
-
Who is online
Users browsing this forum: Glen and 3 guests