This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Frozen pto pulley
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Frozen pto pulley
Any tips on easily removing a stuck pto pulley on a 184? Too flimsy to pull from the OD, and no groove or flange on the hub. Looks like it will need to come off to hook up the top link on the 3 point. Thanks!
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Frozen pto pulley
Not sure which pulley you have, but it more than likely does not require a puller. Go to the 'how to' forum and under videos barnyard has a how to video on removing your pulley. More than likely that's the kind of pulley you have.
Edit: thanks for posting Barnyard!
Edit: thanks for posting Barnyard!
Last edited by tmays on Wed Sep 11, 2013 1:07 pm, edited 1 time in total.
Thomas
-
- Team Cub
- Posts: 24282
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
Re: Frozen pto pulley
I'm not sure what type of pulley you have, but here is the video Thomas mentioned.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Re: Frozen pto pulley
Thanks, Barnyard, but all I got was big square saying plug-in not supported. Any suggestions? Thanks!
BTW, it's the rear pto belt drive pulley (8") that is on the outside of the body, that drives the mower.
BTW, it's the rear pto belt drive pulley (8") that is on the outside of the body, that drives the mower.
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
-
- Cub Pro
- Posts: 28706
- Joined: Sun Feb 02, 2003 8:37 pm
- Zip Code: E1A7J3
- Skype Name: R.H. "Rudi" Saueracker, SSM
- Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger - Circle of Safety: Y
- Twitter ID: Rudi Saueracker, SSM
- Location: NB Dieppe, Canada
Re: Frozen pto pulley
fordyford wrote:Thanks, Barnyard, but all I got was big square saying plug-in not supported. Any suggestions?
You need to upgrade your Adobe plug-ins .. in this case the media player so that youtube will work properly.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship
-
- 10+ Years
- Posts: 3428
- Joined: Wed May 11, 2011 8:59 pm
- Zip Code: 39154
- Tractors Owned: 1969 Farmall Cub
1952 Cub
1942 Farmall H - Location: Raymond, MS
Re: Frozen pto pulley
If you have a woods mower pulley then there are two 1/4 bolts holding the assembly together. The assembly consists of a tapered hub and the pulley. The tapered hub is the center held in by the two bolts. Remove those two bolts and place them in the other two holes in the hub. Then turn those bolts in evenly and they will push the pulley off the hub allowing you to remove the pulley. Sometimes the hub might need a little persuasion to come off but it should be no problem. That is if something hasn't been welded together! Lets hope not. If you have a IH pulley I believe there are three bolts instead of two
Thomas
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Frozen pto pulley
He most likely has the stamped pulley, spray it with penetrating oil , let it soak. work it back and forth, it will break loose with some time
Boss
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- 10+ Years
- Posts: 19
- Joined: Sat Apr 20, 2013 4:55 pm
- Zip Code: 22845
Re: Frozen pto pulley
Before removing the pulley install the toplink and whatever attachment you plan to use. I have a 154 and I can have the pulley on my tractor and still use a scraper blade without hitting the pulley.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: Frozen pto pulley
Using a little heat on the pulley near the splines will expand the bore so it can be removed. We put wet rags behind the pto shaft to prevent the heat from traveling down the shaft. Once it's apart and you go to reassemble it I would suggest a Moly anti Seeze should be applied to the shaft. I do also a trick when heating any diameters I heat half the diameter only. Most of the time we don't need to heat the whole diameter. Think about it half the circle when heating it is enough to expand it and release it. Plus it save gas and time.
I had this problem on my 3pt hitch when I used the single tooth ripper. I did fix it from hitting the pto mower pulley by adjusting the lower limit using the chains on the lower 3pt arms.
I had this problem on my 3pt hitch when I used the single tooth ripper. I did fix it from hitting the pto mower pulley by adjusting the lower limit using the chains on the lower 3pt arms.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 73
- Joined: Sun Dec 18, 2011 5:25 pm
- Zip Code: 37857
Re: Frozen pto pulley
Thanks for the tips!
Some of my ancestors mighta hanged by their necks, but none of them ever hanged by their tails.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 0 guests