Good morning,
Does anyone know where I can purchase a special pipe adapter fitting so that I can plumb a return line to my TC hydraulic reservoir?
I see a picture of one on this forum - 4/8/2006 subject line "TC return line thread." This forum topic suggests contacting WKpoor. Do you know how I can contact WKpoor?
Thanks!
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
where can I get TC thread adapter for filler?
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 379
- Joined: Sun Dec 12, 2004 9:29 pm
- Location: st. paul, mn
where can I get TC thread adapter for filler?
Rick 1948 cub
-
- Team Cub
- Posts: 17279
- Joined: Sun Feb 02, 2003 2:59 pm
- Zip Code: 55319
- Circle of Safety: Y
- Location: MN
Re: where can I get TC thread adapter for filler?
Here is a more recent discussion of that part. It is only needed on later Touch-Controls with the hex headed plug. The earlier ones were a pipe plug.
WKpoor is no longer on this site. However, Earl (who actually makes the parts) is. Just PM member name Earl.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=67818
Edit to add a pointer to my do-it-yourself version. The problem is it requires a standard hydraulic hardware part that isn't very common.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=11&t=33272
WKpoor is no longer on this site. However, Earl (who actually makes the parts) is. Just PM member name Earl.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=67818
Edit to add a pointer to my do-it-yourself version. The problem is it requires a standard hydraulic hardware part that isn't very common.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=11&t=33272
-
- Cub Pro
- Posts: 10540
- Joined: Mon Aug 09, 2004 10:14 pm
- Zip Code: 02840
- Location: RI, Newport
Re: where can I get TC thread adapter for filler?
What I use seems to be the perfect solution, it's essentially a tube with a shut-off (and cap) that fits most larger containers. I think it's USA made and works very well for TC fill and several other uses. In fact, I used it yesterday to put 5 quarts of oil in my little Chevy.
Hopkins FloTool 10106B/6 Spill Saver Trans Fluid/Gear Oil On/Off Filler Refill (Amazon)
Not sure if it makes a difference or not, but with an elbow on the end you will likely 'overfill' the TC. It is full when it runs out the plug hole.
Hopkins FloTool 10106B/6 Spill Saver Trans Fluid/Gear Oil On/Off Filler Refill (Amazon)
Not sure if it makes a difference or not, but with an elbow on the end you will likely 'overfill' the TC. It is full when it runs out the plug hole.
1971 Cub (Rufus) 1950 Cub (Cathy) 1965 Lo Boy Fast Hitch (Nameless III) 1970 Cub 1000 Loader & Fast Hitch (Lee)
-
- 10+ Years
- Posts: 379
- Joined: Sun Dec 12, 2004 9:29 pm
- Location: st. paul, mn
Re: where can I get TC thread adapter for filler?
Thanks for your help fellas!
I will PM Earl as soon as I find his contact information.
Your cub hydraulic explanation is terrific! I wish that I had ordered a "power beyond" valve so that I could have added a filter and extra reservoir.
I will PM Earl as soon as I find his contact information.
Your cub hydraulic explanation is terrific! I wish that I had ordered a "power beyond" valve so that I could have added a filter and extra reservoir.
Rick 1948 cub
-
- Team Cub
- Posts: 11862
- Joined: Tue May 25, 2004 8:02 pm
- Zip Code: 80501
- Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
- Circle of Safety: Y
- Location: CO, Longmont
Re: where can I get TC thread adapter for filler?
Rick, Earl's Forum name is the same, so when you go to PM him all you need to type in is "Earl".
Bob
Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein
we need to think differently."
-Albert Einstein
-
- 10+ Years
- Posts: 1501
- Joined: Thu Oct 18, 2012 3:23 pm
- Zip Code: 13143
- Tractors Owned: 1957 Cub Low Boy w/ FH Mott Flail Mower
1953 Cub w/ sprayer and 54A blade (Chompers)
1954 Cub w/fast hitch (Ira)
1948 Cub ( Papa Paul)with Henderson loader..
1951 Mutt mix Cub (BattleAx
1950 Farmall Cub (basket case demo)
Cub parts tractor
2019 " KuB"ota 2601 loader and roto tiller
1951 Ferguson TEA 20 (parts)( Uncle Rusty)
F/H Disc Harrow for cub L-38
C-22 Sickle Bar Mower
IH C2 and C3 mower
Universal tool attachment with disc hillers..Rear cultivators (various tips
York Rake for Cub home made
Single bottom Plow for Cub F194
Gravely 5660 12 hp/ w snoblower.rototiller,bush hog - Circle of Safety: Y
Re: where can I get TC thread adapter for filler?
If you need his address and phone # I have it in my shop(have to look it up)...Last one I bought was 30 bucks I believe....Drop me a PM if you have any difficulty....Dave
In Memory of 58,286
-
- Similar Topics
- Replies
- Views
- Last post
-
- 8
- 437
-
by CharlieK
Sat Feb 10, 2024 1:54 pm
-
-
hub spline adapter woods42c-6 keeps coming off Attachment(s)
by inairam » Sun Aug 20, 2023 7:39 am » in Farmall Cub - 7
- 627
-
by inairam
Tue Aug 29, 2023 6:01 am
-
-
-
Adapter Fitting for Hydraulic fill port Attachment(s)
by comdiver » Thu Aug 03, 2023 9:23 am » in Farmall Cub - 4
- 186
-
by comdiver
Thu Aug 03, 2023 1:09 pm
-
-
- 1
- 227
-
by Eugene
Sat Oct 16, 2021 7:59 pm
-
- 13
- 989
-
by Glen
Sat Aug 19, 2023 1:15 am
Who is online
Users browsing this forum: No registered users and 8 guests