Thanks to Randy, Bob, Don, Eugene, and "bythepond" for your help. I think I'm on the right track except for a remaining contradiction:
Using a plastic tube and a barb fitting, fuel level in the float bowl checked out just about right - around 9/16" - 5/8" below throttle body surface (top of gasket). I will confirm that when the tank goes back on. (I took it off to check the valve operation and run the compression test.) However, the float measures about 1 15/32" below the T.B. surface in raised position and about 1 19/32" in dropped position, i.e. about 1/8" drop (3/16" is called for).
1. It seems like the actual fuel level is more important than the float height. Does that seem correct?
2. How important is the float drop? Is the 1/8" I have OK or should I mess with the tab?
By the way, compression test checked out decent: 100, 115, 100, 110. I think they should all be within 10 psi but I hope that's close enough to not have to tear the engine down. I will recheck it periodically during running season.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Float Height - Carb Drip III
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 22
- Joined: Sun Aug 18, 2013 2:32 pm
- Zip Code: 06074
- Tractors Owned: 1950 Cub
Sickle Bar
Moldboard Plow - Location: South Windsor, CT
-
- Team Cub Mentor
- Posts: 20378
- Joined: Fri Jul 02, 2004 9:52 pm
- Zip Code: 65051
- Circle of Safety: Y
- Location: Mo. Linn
Re: Float Height - Carb Drip III
Compression. Should be within 10% variance range. Your engine is close enough. Actually pretty decent. I wouldn't over haul the engine.
Carburetor. Correct on fuel level and float drop should be ok. The additional 1/16" float drop will only let a bit more fuel flow into the carburetor.
Carburetor. Correct on fuel level and float drop should be ok. The additional 1/16" float drop will only let a bit more fuel flow into the carburetor.
I have an excuse. CRS.
-
- 10+ Years
- Posts: 1421
- Joined: Sun Apr 30, 2006 2:54 pm
- Zip Code: 60073
- Circle of Safety: Y
- Location: IL, Round Lake Heights
Re: Float Height - Carb Drip III
As Eugene said, fuel level is more important than float height. As for the float drop, once you have the tank back on, put a largeish container under the carb, remove the plug at the bottom of the carb bowl, then turn on the gas. As long as you get a good steady stream of fuel, the float has sufficient drop.
Michael Cummings
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
Eddie - a 1959 International Lo-Boy named after my father in law, who who bought her new.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 15
- 585
-
by Bob McCarty
Mon Apr 11, 2022 12:03 pm
-
- 26
- 879
-
by Gary Dotson
Thu Sep 16, 2021 7:05 am
-
- 13
- 407
-
by lowgearfarm
Mon Jan 10, 2022 6:34 am
-
-
cub ih caruretor float gauge Attachment(s)
by getitrunning » Sun Sep 10, 2023 4:10 pm » in Farmall Cub - 9
- 487
-
by Jackman
Fri Sep 22, 2023 7:51 pm
-
-
- 22
- 857
-
by akguy09
Wed Dec 29, 2021 1:34 pm
Who is online
Users browsing this forum: Bill V in Md and 2 guests