Whew! Relief! All head bolts out w/no break-offs. 1 radiator stud (soaking) and 1 water outlet twist-off - That I can deal with ! Ordered a new radiator from Steven Lane? on e-bay (made in Turkey??) $135 free shipping! We'll see what that is? New core was $250! (ouch!) Time w/tell I guess.
Being the cheapa** I am, did I see a post that someone used grade 8 bolts cut to length rather than pay $5 - 7 each for replacement head bolts?? Any repercussions or thoughts on that?? Hope to mic cylinders tomorrow, w/do valve touch up regardless before I button it back up! Dusty B
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Head Bolts
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
Re: Head Bolts
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
-
- 10+ Years
- Posts: 6338
- Joined: Wed Sep 12, 2007 8:40 pm
- Zip Code: 49120
- Circle of Safety: Y
- Location: Niles / Buchanan, Michigan
Re: Head Bolts
Good deal Dusty!! If you have a local fastener supply house near by like Fastenal or Mid-States Bolt & Screw, you can buy the bolts the correct length and not have to cut them down. They sell the bolts in 1/4" increments instead of the 1/2" increments sold in hardware stores.
1929 Farmall Regular
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
1935 John Deere B
1937 John Deere A
1941 John Deere H
1952 John Deere B
1953 Farmall Cub
-
- 10+ Years
- Posts: 1880
- Joined: Wed May 23, 2007 7:35 am
- Zip Code: 61736
- Tractors Owned: '45 SC Case
- Circle of Safety: Y
- Location: IL, Downs
Re: Head Bolts
OK! Thanks again Ricky - we do have a Fastenal store locally so that w/be an easy out. Thinking of using the head I took off Katrina (switched engines) and w/try to get the local Jr. Coll. to plane the head for me to be sure it's flat. Tried to get enrolled in their engine rebuild class to rework it at a reasonable cost but they won't let us old f**ts in when they have students in a total program - even tho it's us that pay the taxes to buy the equipment !!! The other JC has a "hobby" class for body work but won't even talk about engine rebuilds! Dusty B
Grandpa's '41 B
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
'56,,'57,'59, Cu'b
'45 C
'55 Case S
Dad's DB garden tractor
'48 DeSoto
'31 "A Coup
'79 Lincoln TC
God looks out for those of us who don't know how to look out for ourselves!
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: Head Bolts
I use Grade 8 bolts from McMaster Carr. you need to put a heavy washer under the heads of the short bolts to get the correct length. be sure to chase the threads in the block and use sealant on the threads, and coppercoat the head gasket prior to installation
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 1741
- Joined: Tue Jul 18, 2006 9:55 pm
- Zip Code: 37087
- Tractors Owned: 1947 Cub S/N 9216
w/ C-22 Mower
1974 Cub S/N 244814
w/59 Woods Mower
Ford 3000 Gas S/N C375091 w/Bushhog QT2345 Loader & 6' Squealer Bushhog
and a Palomino Mare named GIGI - Circle of Safety: Y
- Location: TN, Lebanon
Re: Head Bolts
What is reccomended sealant?
"Courage is being scared to death-but saddling up anyway".......John Wayne
-
- Team Cub Mentor
- Posts: 5643
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: Head Bolts
Ron, opinions vary on bolt thread sealant, but I've used PTFE pipe thread paste for many years. Many automotive applications require sealant on the bolts too, so pretty much any mechanic you ask will have an opinion.
-
- Cub Pro
- Posts: 1871
- Joined: Sun Mar 30, 2003 10:25 am
- Zip Code: 06457
- eBay ID: cmtelephone
- Tractors Owned: Restored: 1950 Cub, 1950 Cub Demo, 1948 super AI, 1935 Silver King, 1946 Oliver 60 RC, John Deere M, 1950 C demo.
In working clothes:
1950 cub, 1948 cub, 1941 A, 1948 H, 1963 B414, 1958 240U, 1947 Oliver 60 industrial, Oliver 70 industrial. IH 450, 1963, another 1948 cub, 1946 I6 with Trogan front blade. - Location: CT, Middletown
Re: Head Bolts
Indian head, permatex, copper coat in a can, (as opposed to the spray used on the head gasket) something non hardening. I've used RTV on several with good results. what Gary said as well.
and when you put the head on, cut off the heads on two of your old long bolts, clean them up, and insert them loosely in two of the SHORT head holes at opposite ends of the head. they will act as guides for the gasket and head to prevent slipping around. remove them, of course, to install the last two head bolts
and when you put the head on, cut off the heads on two of your old long bolts, clean them up, and insert them loosely in two of the SHORT head holes at opposite ends of the head. they will act as guides for the gasket and head to prevent slipping around. remove them, of course, to install the last two head bolts
'If they're tappin', they're not burnin'
http://www.ZagrayFarmMuseum.org
http://www.ZagrayFarmMuseum.org
-
- Cub Pro
- Posts: 10290
- Joined: Mon Oct 24, 2005 8:35 pm
- Zip Code: 23962
- eBay ID: dmb2613
- Circle of Safety: Y
- Location: VA. Randolph
Re: Head Bolts
I am not sure IH used grade 8 bolts to start with, I have drilled out quit a few and they did not drill like grade 8s. It takes a real good bit to drill a grade 8
Oh by the way Art, glad you used the GM on the straight A
Boss
Oh by the way Art, glad you used the GM on the straight A
Boss
IN GOD WE TRUST
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
All others pay cash
Boss Hog
Power corrupts; absolute power corrupts absolutely byJohn Emerich Edward Dalberg
-
- Similar Topics
- Replies
- Views
- Last post
-
- 1
- 166
-
by Don McCombs
Mon Jan 17, 2022 7:34 am
-
- 12
- 396
-
by Clemsonfor
Fri Feb 18, 2022 5:20 pm
-
- 2
- 183
-
by Stoffregen Motorsports
Wed Sep 06, 2023 2:40 pm
-
- 4
- 115
-
by NJ Farmer
Fri Apr 26, 2024 6:33 am
-
-
Rear main seal plate bolts tightness. Direction rod cap bolts
by pett3227b » Thu Jun 02, 2022 12:31 pm » in Farmall Cub - 8
- 310
-
by Mht
Mon Jun 06, 2022 6:48 pm
-
Who is online
Users browsing this forum: CharlieK, Majestic-12 [Bot], Super A and 3 guests