I am currently restoring our 1945 BN. The shifter was welded straight and I want to put the original bend back in. Can anyone give me a good photo or dim to bend
Thanks PWL
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
BN shifter
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
BN shifter
"Work Hard ,Play Often,Care Always"
-
- 10+ Years
- Posts: 1254
- Joined: Wed Aug 31, 2005 5:10 pm
- Zip Code: 03574
- eBay ID: farmallkid48
- Skype Name: farmall_kid
- Tractors Owned: 41 B
48 H
49 C
50 red demo Cub
51 C
52 Cub
54 Super C
61 and 63 Cub Cadet Originals
78 Cub Cadet 1450
73 154 lo-boy - Location: NH, Bethlehem
I have a pic of it in a parts break down? If you want it, I could take a screen shot? kinda small and it's at an akward angle, the drawing...
I also wouldn't mind a good pic, as mine is also welded straight
Thanks, Johnny
I also wouldn't mind a good pic, as mine is also welded straight
Thanks, Johnny
70 Brockway 361
http://photobucket.com/albums/c47/jostev/
http://photobucket.com/albums/c47/jostev/
-
- 10+ Years
- Posts: 1484
- Joined: Wed May 25, 2005 1:21 pm
- Zip Code: 43449
-
- 10+ Years
- Posts: 36
- Joined: Sat Aug 20, 2005 2:37 pm
- Location: Indianapolis, IN
There is a shifter on ebay if you didn't have any luck bending yours.
http://cgi.ebay.com/Farmall-Super-A-par ... dZViewItem
http://cgi.ebay.com/Farmall-Super-A-par ... dZViewItem
It's easier to ask dumb questions than it is to correct dumb mistakes.
Who is online
Users browsing this forum: No registered users and 0 guests