'67 Loboy (Frank) Update

Farmall Cub Forum -- Questions and answers to all of your Cub related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

'67 Loboy (Frank) Update

Postby EZ » Mon Dec 15, 2003 12:08 pm

I had a bit of time this morning so I took another look at Frank.
Installed, battery, carb, filled rad again.
Fired right up, great oil pressure, running smooth.
For the very first time, I climbed on and pressed on the clutch.
Lots of rattling noise from the clutch, and I could not get it depressed enough to get into gear. When I finally pressed down hard enough, the tractor stalled. Released the clutch and fired back up.

Sooooooo.....I guess for now I won't be taking Frank for a test run.
Anybody have any ideas what might be happening? Maybe the clutch is shoe-packed? I'll have alook in the hand hole after lunch and try to see what is going on.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Postby Randy 64 Cub » Mon Dec 15, 2003 1:01 pm

Sounds like a bad throw-out bearing.
-Finesse is choosing the right size hammer.

-As soon as something is made idiot-proof they make a better idiot.
Randy 64 Cub
Cub Star
Cub Star
 
Posts: 78
Joined: Fri Aug 15, 2003 7:15 am

Postby EZ » Mon Dec 15, 2003 5:02 pm

Yeah, I think you are right,
Looking through the hand hole you can see the throwout bearing face is in bad shape, and things is a bit floppy with it.

I guess that means I'll have to split Frank in half?

Any guess for price of new bearing?
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Postby Rudi » Mon Dec 15, 2003 7:09 pm

EZ:

I think my brother-in-law George, said that it cost him 40 or 50 bucks Cdn at the CaseIH Dealer for the graphite block bearing a couple of years ago, but I could be off by a bit. Ifn you want to upgrade, try NTN Bearings or Canada Bearing. Shouldn't be all that much.

I just checked on line at http://www.casetractorparts.com and this is what popped up

Code: 350921R11
Price: $53.62

Hope that helps. Oh that is US of course, so it would be around 80.00Cdn.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship

User avatar
Rudi
Team Cub
Team Cub
 
Posts: 28425
Joined: Sun Feb 02, 2003 8:37 pm
Location: NB Dieppe, Canada
Zip Code: E1A7J3
eBay ID: ve9rhs
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1951 Cub "Jethro"
Dad's Putt-Putt
IH 129 CC
Circle of Safety Award
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM

Postby EZ » Mon Dec 15, 2003 7:46 pm

Rudi,

You are truly a help.
Thanks for looking that up. That part number I'm guessing is the IH part number? I'll call Chas Richards with the number and see what he says for price. They are very good with shipping and availability. Plus I am now going to try sticking to IH parts as they are of better quality, especially carb parts, and gaskets. For the last couple weeks I was looking forward to this day when I would take Frank for the test run. What a downer when I could not even leave the shop. Looks like a split job now, and that's still just to test. The tranny looks very good inside, and it rolls nice. I don't expect too much wrong after this.

Hoping to get a digital camera soon, maybe under the tree, so I can share some pics.
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario

Postby EZ » Fri Dec 19, 2003 10:21 am

Should get a new Throw-out bearing in the mail soon. $103Cdn.
The original is broken in a couple spots, that is, the graphite block, so it is not pushing evenly on all the clutch fingers. I also notice all 3 jamb nuts are missing off the adjusters, so I'll have to scare something up for those.

Merry Christmas to all,
If you're in the 'hood, drop by for a cup of Nog!
Just Do It !
User avatar
EZ
501 Club
501 Club
 
Posts: 936
Joined: Tue Feb 11, 2003 6:33 pm
Location: Northern Ontario


Return to Farmall Cub

Who is online

Users browsing this forum: Posco and 8 guests