Farmall Super A, AV, 1939 - 1954
Moderator: Team Cub
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
6 posts • Page 1 of 1
I was not real sure where to post this question, so here goes. I have a belly mount sickle bar mower that came with a 140 that I purchased last fall. The guy I bought it from says it may have originally come off of a Super A.
All the mowers I have seen have been rear mounted. This mower looks just like a cub mower only bigger. I have the desire to restore it and put it to work. I would like to find a manual, and I also need a few parts. I need to know what model it is to begin my search for parts.
The biggest problem I see facing me is to find a replacement pulley for the mower drive shaft. The one I have has a notch broke out of the side.
It may be possible to repair the broken pulley. I am guessing it is cast iron?
Thanks to anyone who can lend a helping hand.
Click on the first manual link above (next to Home). Near the bottom of the list click on the Super A Manuals link. There you will find links to IH-22 mower manual and parts manual.
'60 FH Lo-Boy
'57 FH Cub "Rusty"
'56 FH Cub
(2) '48 Cubs
'75 IH 140 w/1000 loader
C-3 mower, FH Woods 42F, 22 sickle (2), 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier
Thanks for the directions to the "A" manual. I had missed this area, and needed a manual for my "A". I guess I must have missed the mower manuals however. So still no manual for this mower. No big deal. I have a line on a pulley, provided mine is in fact an "A-22"
Does any one know if these were pretty good mowers? Is it a waste of time and money to restore mine? This mower looks like a cub mower just bigger and more heavy duty. If it works as well as Dad's Cub mower it should be a really good tool.
I hope to drag it to the shop this weekend and start the tear down.
I have a number of manuals that are simply not on the server or even scanned. I will have a look through them and see what I might have to help out. I know I have the manuals for the trailing mower for the A/SA.
Thank you so much for looking. I enjoy the manuals on line. They are very helpful to us new-comers who usually never see any of these old books.
I really dont know 100% for sure what model it is. Neat little mower looks just like the cub only more heavy made and a little larger. Uses larger pulley than the cub on the PTO and a smaller one on the mower it's self. Ratio appears to be almost a one to one.
I would sure like to restore it, as it would fit either my 130 or 140.
6 posts • Page 1 of 1
Who is online