3 point hydraulic cylinder rebuild

[ibdilbert]

Anyone rebuild the hydraulic cylinder on the 3 point? Mine is leaking oil out of the top. Any rebuild kits available?

[wrink3]

I couldn't find any when doing mine a couple of years ago. The parts you need are listed here

viewtopic.php?t=100601

Mine has worked great since except when some trash got in the spool valve--not the cylinders fault. The valve cleaned up ok and life has been good since.

[BigBill]

I think your local hydraulics shop could have what you need. The parts must be common. I rebuilt cylinders on a cub cadet fel. The hyd shop had it all.

[SONNY]

check on the internet and IF all fails try Case. They can find a lot of parts. got 185 parts from our dealer here ---- course they aint cheep!!

[Bbading1989]

Anyone rebuild the hydraulic cylinder on the 3 point? Mine is leaking oil out of the top. Any rebuild kits available?

A little late to the party but there were two different style cylinders built. The one that has the retainer pin that you remove through the hydraulic port is the most common. I don't have the part numbers off hand but you can get all the parts at orings.com. I bought a the equipment of 4 rebuild kits for less than $30 when the case dealer was going to charge me $100 for one rebuild kit

[ibdilbert]

Thanks! I haven't had a chance to tear it apart yet, I've been using a spare, and it also leaks, just not as bad.

[SONNY]

You get what you pay for!!!! keep that in mind when buying parts!!! Make sure you are getting the EXACT same thing for the price! There is a difference!